BLACKHAWK XDS100V2 DRIVER DOWNLOAD

Previously it looked like you needed to worry about these things called. And this lasts maybe 20 seconds. Click on the Verify button and you should see something like this dialogue if you scroll all the way to the bottom of it: Now you can power up your BBB but, since you are going to program on the bare metal with this, you need to avoid booting the BBB in Linux. On the mac, it is unbearably slow and I keep thinking that the CC Studio has frozen but I’m hoping this is a weird thing that is happening because I’m running Linux in VMWare on my Mac instead of running it natively. Install CC Studio first! This means you should be ready to try out a simple program.

Uploader: Grogore
Date Added: 14 June 2010
File Size: 43.79 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 63569
Price: Free* [*Free Regsitration Required]

Previously it looked like you needed to worry about these things called.

BeagleBone Black Debugging via TI USBv2 JTAG Emulator

Menu Close Home Subscribe. Ultimately, it should say that it successfully initialized the BBB and the dialog box will say that it is loading your blackhawl onto the BBB:. Once you finish that, it should bring you up into your little project: JTAG is the answer to that. When you get that bad boy connected, your rig looks like the following: On the mac, it is unbearably slow and I keep thinking that the CC Studio has frozen but I’m hoping this is a weird thing that is happening because I’m running Linux in VMWare on my Mac instead of running it natively.

Click on the Verify button and you should see something like this dialogue if you scroll all the way to the bottom of it:. I installed the new version of Linux in a new VMware but the same thing happened.

  INTELR ATOMTM CPU 230 @ 1.60GHZ SOUND DRIVER DOWNLOAD

At the very least it’s a good way to show people hardware in action even if it’s painful. It didn’t link properly. Bought a [BeagleBone Black] http: Hold down the S2 button and then the power button at the same time on the BBB.

Use Tag-Connect with TI DSP’s – Tag Connect

Click on the Verify button and you should see something like this dialogue if you scroll all the way to the bottom of it: I single step machine instruction to instruction without delay. Follow xda100v2 instructions you get with the JTAG emulator.

After another 20 seconds, it will take you to a breakpoint at the start of your blackhawi program: Keep holding the S2 down for a few seconds after clicking the power button. Samtec part number FTRG 20 pin male connector, surface mountwhich looks like this once you get it soldered onto the bottom of the board: Ultimately, it should say that it successfully initialized blackhawi BBB and the dialog box will say that it is loading your program onto the BBB: I never try that out because it sounds like an incredible pain.

How to debug imx28_evk using JTAG

I think it’s effectively a little serial bus that weaves around to the various components on the chip and then makes that available to devices like TI’s “Blackhawk” JTAG Emulator.

This means you should be ready to try out a simple program.

Now xxs100v2 can power up your BBB but, since you are going to program on the bare metal with this, you need to avoid booting the BBB in Linux. There is no Mac version so I am stuck. Debugging from a Mac slow [updated next day] On the mac, it is unbearably slow and I keep thinking that the CC Studio has frozen but I’m hoping this is a weird thing that is happening because I’m running Linux in VMWare on my Mac instead of running it natively.

  HUAWEI E353 DRIVER

BeagleBone Black Debugging via TI USB100v2 JTAG Emulator

Because of all of these system-on-a-chips like the Sitara on the BBB, there are literally no physical pins that you can connect to to ask what’s on the bus and what’s in the registers and so on.

And this lasts maybe 20 seconds.

Also, if I want to just play around with ARM assembly code I can do that by booting in Linux and ssh’ing onto the device. It turns out that there’s just something about using CC Studio from a linux VMWare image that just doesn’t work right.

It’s pretty cool; you can check out all of the registers as you single step, either by assembly instruction blacmhawk by C statement.

Install CC Studio first! I installed everything on a Windows machine next-door and it is not slow at all. I bought a complete adapter kit from tin can tools but it turns out all I needed was the JTAG header: When you get that bad boy connected, your rig looks like the following:. Samtec part number FTRG 20 pin male connector, surface mountwhich looks like this once you get it soldered onto the bottom of the board:.

To actually install i.